product bulletin dimensions ? millimeters kemet size code eia size code l length w width h height k 0.20 (.008) f 0.10 (.004) s 0.30 (.012) b(ref) 0.15 (.006) x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) b 3528-21 3.5 0.20 (.138 .008) 2.8 0.20 (.110 .008) 1.9 0.20 (.075 .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) c 6032-28 6.0 0.30 (.236 .012) 3.2 0.30 (.126 .012) 2.5 0.30 (.098 .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) d 7343-31 7.3 0.30 (.287 .012) 4.3 0.30 (.169 .012) 2.8 0.30 (.110 .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) x 7343-43 7.3 0.30 (.287 .012) 4.3 0.30 (.169 .012) 4.0 0.30 (.157 .012) 2.3 (.091) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) outline drawing
f-9075 03/06 t496 series - fail-safe fused tantalum surface mount capacitor dscc dwg. 04053 approved features built-in fuse protects against damaging short circuit failure mode fuse actuation, 25c: within 1 second at fault currents of 4 amps and higher precision-molded, laser-marked cases continuous current capability: 0.75 amps symmetrical, compliant terminations post-actuation resistance, 25c: 10 megohms minimum case geometry and footprints equivalent to industrial grade t491 series. (case sizes b, c, d andn x only) test tabs on the sides of the case bypass the capacitor element allow direct testing of the fuse assembly patented fuse assembly operating temperature: -55c to +125c 100% surge current test on c, d, x sizes available tested per dscc dwg. 04053 component marking 105 25 k 610 polarity indicator (+) picofarad code rated voltage print week code 1st digit = year 2nd & 3rd digits = week ?610? = 10th week of 2006 f+ fused fail-safe device construction fuse molded case silver adhesive washer positive termination* weld negative termination* mn0 2 coat (first layer) silver paint (third layer) tantalum wire carbon (second layer) tantalum (ta 2 o 5 ) polarity stripe (+) polarity bevel (+)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com capaci- tance
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com capaci- tance
|
